HOW TO SET DIMENSION STYLE SETTING IN AUTO CAD

Translate

HOW TO SET DIMENSION STYLE SETTING IN AUTO CAD

  Upendra Kumar
   28.05.2020                         



                          HOW TO SET DIMENSION STYLE IN AUTO CAD


The requirement of dimension set in the auto cad is setting in the text, color, height, etc. By the use of dimension style easily change the featured in dimension text in the auto cad.

PROCEDURE:- Open the Autocad drawing sheet, draw a polygon because polygon has covered the maximum featured of the dimension style setting.

  HOW- TO -SET -DIMENSION -STYLE -IN -AUTO -CAD

Go to menubar of the drawing sheet > Left-click the Dimension> Drop down the curser > Left-click the Dimension style.
                                                                OR

 In command > Write the command DIMSTY> enter

  HOW -TO- SET- DIMENSION -STYLE -IN -AUTO- CAD

Open a Dimension Style Manager dialogue box> Click the right side in the modify tab.

                                               LINES SETTING


  HOW- TO- SET- DIMENSION -STYLE-IN AUTO -CAD

Then an open modify dimension style dialogue box. In the modify dimension style dialogue box click the Lines tab. In the dimension style, there are two lines one is called dimension lines which are shown in red color, and other lines are called extension lines which are shown in blue color.



 SETTING OF DIMENSION LINES
If you want the changed the setting of dimension lines you can easily change the color, line type, line weight, and baseline spacing. If you want to hide the dimension line then click in Suppress Dim line 1 and Dim line2.

 SETTING OF EXTENSION LINES
If you want the changed the setting of extension lines you can easily change the color, line type, line weight, and baseline spacing. If you want to hide the extension line then click in Suppress Ext line 1 and Ext line2.

In the extension lines setting also change in extend beyond the dim line and offset from the origin.

                                 SYMBOLS AND ARROWS SETTING


  HOW- TO -SET -DIMENSION- STYLE- IN -AUTO- CAD
   
In this setting change the Arrowheads, Arrow size,  etc.

                                                 TEXT SETTING

  HOW- TO- SET -DIMENSION -STYLE -IN- AUTO- CAD

In the text, setting change the text appearance, text placement, and text alignment.

                                                       FIT SETTING

  HOW- TO- SET -DIMENSION- STYLE- IN -AUTO- CAD

In the fit setting change setting of text and arrow-like in the form of the base fit arrows and text and text placement etc

                                                         PRIMARY UNIT SETTING

  HOW -TO- SET- DIMENSION -STYLE- IN -AUTO- CAD

The primary unit setting is the most important setting for drawing purposes. In this setting change unit formate keep Decimal and precision as per requirement. In the angular dimension, setting keep the unit formate Degrees Minutes Seconds and precision is 0d00'00".

                                                     ALTERNATE UNITS SETTING

  HOW- TO- SET- DIMENSION- STYLE- IN- AUTO- CAD


Alternate units setting is required according to the requirement of unit formate.
 

                                                         TOLERANCE


                Tolerance setting is required according to the requirement of unit formate. 
     

                     SEE THE POLYGON SETTING BELOW THE VIDEO




                                                            

                                                          

                                                       

Close Menu